February 11, 2015

Fiber Optic Adapter You Must Know

Fiber Optic Adapters,couplers,mating sleeves, FC, SC, ST, LC, UPC,APC,MT-RJ, MU, E2000,female to female,hybrid,female to male, hybrid fiber optic adapters,multimode fiber connectors, multimode fiber optic adapters,simplex,duplex, quad fiber adapters.

Fiber optic adapters are mating devices used to link the connectors and fiber patch cords, adapters are commonly seen on patch panels and optical distribution units, we have the fiber optic adapters that are with flange to mount on the equipment, and we supply the no-flange fiber optic adapters too.

Fiberstore fiber optic adapters are female to male types and male to female types, different assortment including SC,FC,ST,LC,E2000,MU, there are single mode adapter andsma to to sma optical adapteravailable, we also have hybrid fiber optic adapters to match different kinds of fiber optic connectors,all of our fiber optic adapters use ceramic sleeves to ensure the high standard performance.

Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called "hybrid", accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.

Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.

We keep commonly used fiber optic adapters in stock and the delivery is fast, we make the fiber adapters strictly according to industry practice and we make sure they are compatible to use with most of the equipment in the market.

Posted by: kelonlau at 06:29 AM | Comments (20) | Add Comment
Post contains 332 words, total size 3 kb.

February 09, 2015

Hybrid Fiber Optic Adapters

Fiberstore fiber optic adapters are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection. people sometimes also name them to be mating sleeves and hybrid adapters ,mating sleeves means this fibre optic adapter is used to connect the same type fiber optic connectors ,while hybrid adapters are the fiber optic adapter types used to connect different kinds of fiber optic connectors. Fiberstore fiber optic adapters have a name for its stability.

They provide reliable solution for fiber connections,e2000 fiber adapter apcand multimode fiber optic adapters available on request. Fiberstore adopt high quality raw materials and make these fiber optic adapters strictly according to international standard, this makes our fiber optic adapters fully compatible with the products from other manufacturers' in the market. Fiberstore offer Fiber Optic Adapters FC, SC, ST, LC, MT-RJ, MU, simplex, E2000, FC/APC, duplex, SC/APC, LC/APC, E2000/APC ,quad, mating sleeves, hybrid fiber optic adapters, Single mode fiber optic adapters, multimode fiber optic adapters.

Hybrid fiber optic adapters offer a solution for hybrid applications where the two different kinds of fiber connectors or cable assemblies need to be linked with each other. Most ofe2000 to sc adapteruse high precision ceramic sleeves which enable reliable ferrule mating and ensure low insertion loss and return loss during the linking.

Male-Female hybrid fiber adapter (Build-out Type hybrid fiber adapter) is a fiber adapter with a connector plug (male) end and an adapter socket (female) end. We call it Male-Female Hybrid fiber adapter. Such as ST male at one side, FC female the other side.

Female-Female hybrid fiber adapter (Bulk Type hybrid fiber adapter) is a fiber adapter with two different ends. We call it Female-Female Hybrid fiber adapter. Such as ST female at one side, FC female at the other side.

Our Hybrid Fiber Adapters are comprised of a polymer/metal outer body and inner assembly fitted with a precision alignment mechanism. The combination of a ceramic/phosphor bronze alignment sleeves and precision moulded polymer housing provides consistent long-term mechanical and optical performance.

We provide both Male-Female and Female-Female hybrid fiber adapters bridging popular connector types, such as ST, FC, SC, LC, MU, FDDI, E2000, MPO. They are precision made and manufactured to demanding specifications. Hybrid optical adapters with male to female configuration are very useful in connecting patchcords with different connectors. Because both a connector plug (male) and an adapter socket (female) are provided, this hybrid adapter fits in various circumstances, offering flexibility and reducing the size, weight and complexity of the system. It has low insertion loss and high return loss. We provide hybrid adapters bridging popular connector types, such as FC, SC, ST and LC.

Posted by: kelonlau at 06:35 AM | Comments (106) | Add Comment
Post contains 447 words, total size 3 kb.

February 06, 2015

Fiber Optic Patch Cord Connector Classification

Fiber optic patch cord use fiber optic patch cord at each end of the module to send and receive wavelengths must be consistent, meaning that both ends of the fiber must be of the same wavelengths of light modules, simple method of distinction is the light color of the module to be consistent. R&gt most cases, short-wave optical module using multimode fiber (Orange fiber), long-wave optical module using single-mode fiber (yellow fibers) in order to ensure the accuracy of the data transmissions. Do not excessively bent optical fiber in use and around the ring, which would increase the attenuation of light during the transfer process. Fiber optic patch cord must be used after using optical fiber connector protection protective sleeve on it, dust and oil pollution will damage fiber coupling.

Types of fiber optic patch cord in LAN, due to multimode fibre, it was a sending, receiving, so is a pair of jumpers. And often fiber terminal box or will be provided by the optical fiber distribution frame-FC (screw) or ST-(bayonet) optical interfaces. So one end of the jumper is FC or ST-type, may be at the other end optical fiber transceiver or GBIC fiber modules SC-(port), LC SFP fiber module, then MT-RJ fiber MT-RJ switch the interface type.

Fiber optic patch cord are used for linking the equipment and components in the fiber optic network ,they are with various kinds of fiber optic connector types. the fiber optic patch cord types are classified by the fiber optic connector types, for example, we name LC fiber optic patch cord because this cable is with LC fiber optic connectors there are PC,UPC,APC type fiber patch cord, they are different because of the polish of fiber connectors.

LC Fiber Optic Patch Cord

LC is the short form of Lucent Connector, This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. LC fiber patch cord connector is a push and latch structure, with plastic housing and accurate 1.25mm ceramic ferrule.fiber cable LC to LCis a popular kind of small form fiber optic patch cord which reduce the space and it is widely used for densely installation.

E2000 Fiber Optic Patch Cord

E2000 fiber optic patch cord is one of the latest style yet one of the most expensive cable. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. Features a spring-loaded shutter used to protect the ferrule from dust and scratches. E2000 fiber connectors is similar size of SC fiber connectors.

SC Fiber Optic Patch Cord

The SC fiber optic patch cord was invented by the Japanese company NTT. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. It is one of the most widely used fiber optic patch cords.ST to ST fiber cablefeatures low cost , simplicity as well as good durability, SC fiber optic patch cords is with a locking tab on the cable termination, it is a push and pull type fiber optic connector.

ST Fiber Optic Patch Cord

ST fiber optic patch cords standard was developed by AT&T. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. this kind of cable is with straight tip type terminations. there is only simplex ST fiber optic patch cords and no duplex ones. These days ST fiber optic connectors are usually with a metal housing ,although there are plastic housing ST fiber connectors, more and more people tend to use metal housing ST.ST APC fiber optic patch cord are also available.

FC Fiber Optic Patch Cord

FC fiber optic patch cords are with FC fiber optic connectors ,which is a screw type connection. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. FC fiber optic patch cords were very much popular in the past ,but people tend to use LC and SC to replace FC more and more.

To facilitate installation of our active fiber equipment we support a large selection of fiber optic patch cords. The always in stock fiber cables include optical connectors such as: SC, ST, LC and FC type, simplex and duplex. Our patch cords range from 0.5m to 10m and have almost all available combination of optical connectors. The most available lengths are 1m, 2m, 3m, 5m, and 10m patch cords. All single-mode patch cords are UPC polished (Ultra Physical Contact), while the multi-mode cables are PC polished. All patch cords are manually tested and verified and each patch cable is individually sealed and labeled with measured optical performance.

Posted by: kelonlau at 07:05 AM | Comments (15) | Add Comment
Post contains 782 words, total size 5 kb.

<< Page 1 of 1 >>
71kb generated in CPU 0.0309, elapsed 0.1931 seconds.
36 queries taking 0.1725 seconds, 168 records returned.
Powered by Minx 1.1.6c-pink.