Fiber optic patch cord use fiber optic patch cord at each end of the module to send and receive wavelengths must be consistent, meaning that both ends of the fiber must be of the same wavelengths of light modules, simple method of distinction is the light color of the module to be consistent. R&gt most cases, short-wave optical module using multimode fiber (Orange fiber), long-wave optical module using single-mode fiber (yellow fibers) in order to ensure the accuracy of the data transmissions. Do not excessively bent optical fiber in use and around the ring, which would increase the attenuation of light during the transfer process. Fiber optic patch cord must be used after using optical fiber connector protection protective sleeve on it, dust and oil pollution will damage fiber coupling.

Types of fiber optic patch cord in LAN, due to multimode fibre, it was a sending, receiving, so is a pair of jumpers. And often fiber terminal box or will be provided by the optical fiber distribution frame-FC (screw) or ST-(bayonet) optical interfaces. So one end of the jumper is FC or ST-type, may be at the other end optical fiber transceiver or GBIC fiber modules SC-(port), LC SFP fiber module, then MT-RJ fiber MT-RJ switch the interface type.

Fiber optic patch cord are used for linking the equipment and components in the fiber optic network ,they are with various kinds of fiber optic connector types. the fiber optic patch cord types are classified by the fiber optic connector types, for example, we name LC fiber optic patch cord because this cable is with LC fiber optic connectors there are PC,UPC,APC type fiber patch cord, they are different because of the polish of fiber connectors.

LC Fiber Optic Patch Cord

LC is the short form of Lucent Connector, This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. LC fiber patch cord connector is a push and latch structure, with plastic housing and accurate 1.25mm ceramic ferrule.fiber cable LC to LCis a popular kind of small form fiber optic patch cord which reduce the space and it is widely used for densely installation.

E2000 Fiber Optic Patch Cord

E2000 fiber optic patch cord is one of the latest style yet one of the most expensive cable. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. Features a spring-loaded shutter used to protect the ferrule from dust and scratches. E2000 fiber connectors is similar size of SC fiber connectors.

SC Fiber Optic Patch Cord

The SC fiber optic patch cord was invented by the Japanese company NTT. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. It is one of the most widely used fiber optic patch cords.ST to ST fiber cablefeatures low cost , simplicity as well as good durability, SC fiber optic patch cords is with a locking tab on the cable termination, it is a push and pull type fiber optic connector.

ST Fiber Optic Patch Cord

ST fiber optic patch cords standard was developed by AT&T. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. this kind of cable is with straight tip type terminations. there is only simplex ST fiber optic patch cords and no duplex ones. These days ST fiber optic connectors are usually with a metal housing ,although there are plastic housing ST fiber connectors, more and more people tend to use metal housing ST.ST APC fiber optic patch cord are also available.

FC Fiber Optic Patch Cord

FC fiber optic patch cords are with FC fiber optic connectors ,which is a screw type connection. This is a physical contact fiber optic connection that we offer and has a UPC ultra quality polish. FC fiber optic patch cords were very much popular in the past ,but people tend to use LC and SC to replace FC more and more.

To facilitate installation of our active fiber equipment we support a large selection of fiber optic patch cords. The always in stock fiber cables include optical connectors such as: SC, ST, LC and FC type, simplex and duplex. Our patch cords range from 0.5m to 10m and have almost all available combination of optical connectors. The most available lengths are 1m, 2m, 3m, 5m, and 10m patch cords. All single-mode patch cords are UPC polished (Ultra Physical Contact), while the multi-mode cables are PC polished. All patch cords are manually tested and verified and each patch cable is individually sealed and labeled with measured optical performance.

Posted by: kelonlau at 07:05 AM | Comments (15) | Add Comment
Post contains 782 words, total size 5 kb.